thermodynamic steam trap thermodynamic steam trap сетчатый фильтр globe valve globe valve globe valve ball valve globe valve globe valve ball valve ball valve membrane valve membrane valve shutoff valve shutoff valve knife valve safety valve safety valve globe valve relief valve relief valve relief valve relief valve relief valve knife valve ball valve safety valve safety valve safety valve safety valve globe valve shutoff valve

relief valve
knife gate valve
globe valve

Equipment supplied

Shell-and-tube heat exchangers of various configurations:

  • with a hard matrix
  • with a floating matrix
  • with U-tubes
  • with grilled tubes
  • special designs with protective pipes and pipe welding in the pipe opening
shell-and-tube heat exchangers

Construction features:

  • Diameter: 6 m
  • Length: 65 m
  • Weight: 250 t
  • Pressure: up to 500 bar
  • Medium temperature: -200 ... +650 oC
  • Wall thickness: up to 100 mm

Equipment is manufactured acc. to the following requirements and certificates: TUV, ASME, GOSGORTEKHNADOR, DVS(DIN 18 800), Det Norske veritas etc.


Construction materials:

shell-and-tube heat exchangers
  • carbon steels
  • low- and high-alloy steel
  • stainless steels
  • chrome-molybdenum alloys and nickel alloys
  • copper, brass and aluminum alloys
  • clad materials
  • acid- and heat-proof steels
  • titanium alloys
  • duplex steels
  • special materials (Monel, Hastelloy)

Tubes and fittings from polymer materials (PTFE and PFA) for application in severe conditions

Polymer tubes and fittings Polymer tubes and fittings

PTFE Isostatic form

  • Fitting as a single part
  • Thickness up to 12 mm
  • Dia. up to DN500 (20")
  • PTFE powder (ASTM B 4894)

Products: T-joints, collectors, complex forms, etc.

PFA Pressure molding

polymer tubes and fittings polymer tubes and fittings polymer tubes and fittings
  • Fitting as a single part
  • Reliable construction
  • PFA resin (ASTM B 3307)

Products: T-joints, four-way junction pieces

polymer tubes and fittings polymer tubes and fittings

The entire range of tubes and fittings is available:

  • Dia. from DN15 (1/2") up to DN600 (24")
  • According to ANSI B 16.5 or DIN2848
  • Flange is acc. to ANSI 150 lbs, 300 lbs, PN10, PN16, JIS10, etc.
  • Perfect vacuum available up to DN300 (12")
  • Anti-Static PTFE up to DN400 (16")

polymer tubes and fittings

We supply also packings and plates from polymer materials for columns and reactors

  • Adaptors from graphite
  • Plates from graphite
  • Adaptors from PVDF
  • Plates from PVDF

Properties:

  • Mechanical properties acc. to ASTM F 1545
  • Density: d = 2.14 up to 2.20
  • Ultimate strength: Ts > 21 Nm
  • Elongation at rupture: EI > 250%

Corrosion-resistant centrifugal pumps of various designs and configurations

Corrosion-resistant centrifugal pumps

One-stage heavy process pumps
Q = up to 850 m3/hr, PN = up to 160 bar

Pumps for corrosive chemicals
Q = up to 2000 m3/hr, PN = up to 25 bar

Corrosion-resistant centrifugal pumps Corrosion-resistant centrifugal pumps

Volute pumps
Q = up to 1800 m3/hr, PN = up to 16/25 bar

Process pumps with open impellers
Q = up to 800 m3/hr, PN = up to 40 bar

Corrosion-resistant centrifugal pumps Corrosion-resistant centrifugal pumps Corrosion-resistant centrifugal pumps

Horizontal & vertical multistage high-pressure pumps
Q = up to 300 m3/hr, PN = up to 160 bar

Horizontal & vertical multistage explosion-proof pumps
Q = up to 500 m3/hr, PN = 10-100 bar

Corrosion-resistant centrifugal pumps

Multistage high-pressure pumps for low NPSH values
Q = up to 800 m3/hr, PN = up to 40/64 bar

Propeller pumps
Q = up to 7000 m3/hr, PN = up to 6 bar

Self-priming centrifugal pumps
Q = up to 100 m3/hr, PN = up to 10 bar

Corrosion-resistant centrifugal pumps Corrosion-resistant centrifugal pumps

Multistage self-priming centrifugal pumps
Q = up to 500 m3/hr, PN = 6-40 bar

Hermetic pumps with magnetic couplings
Q = up to 1000 m3/hr

Horizontal and vertical centrifugal slurry pumps
Q = up to 8000 m3/hr, PN = up to 10 bar

All models conform to DIN & API standards


Steam turbines and electric generators

Steam turbines and electric generators
Steam pressure: up to 67 bar
Temperature: up to 540°C
Output power: up to 50MW

5. Control ang automation equipment:

Control ang automation equipment
  • smart pressure sensors
  • photoelectric sensors
  • flow sensors
  • moisture and temperature sensors
  • pressure gauges
  • electromagnetic flow meters
  • converters
  • detectors
  • controllers
  • control valves and positioners
Control ang automation equipment Control ang automation equipment Control ang automation equipment

Other equipment and spare parts, including:

  • compressor equipment for air and gases
  • stop and control valves of various types
  • hydraulic motors, wrenches and cylinders
  • pick and place equipment and spare parts
  • electric motors, reduction gears and motor reducers of various configurations
  • mechanical seals
  • drum motors
  • conveying equipment
  • conveyor belts, bands and bearings
  • refractory materials for furnaces of various types
equipment and spare parts equipment and spare parts equipment and spare parts

Metering pumps

Type LDD. Variable eccentric pump drive.

Performance:
Pressure up to 7 bar
Flow rate up to 4,5 m3/h per pump head
Temperature up to 400°C

Metering pumps
  • Rod thrust: 6 kN
  • Stroke length: 30 mm
  • Stroke adjustment: available with fixed stroke length or with stroke length adjustment. Setting of stroke length is carried out manually or electrically
  • Linear stroke adjustment in steps of 0.01 mm via hand wheel while pump is stopped or in operation. Proven variable eccentric drive principle, that means stroke length is adjusted where it arises: at the eccentric
  • API 675 specification is met
  • Differing stroke rates make it possible to meet requirements for different fluids and process conditions
  • Pump head types: plunger- and diaphragm pump heads can be mounted
  • Drive: AC and DC motors, frequency inverter possible
  • Attachable instruments: contactor

Method of operation

The drive shaft turns the eccentric via the worm gear and the hollow shaft. The connecting rod converts the rotary motion of the plunger rod. The stroke length for the displacer movement is set (with the pump stopped or in operation) through radial shifting of the eccentric. For this the sliding shaft is axially shifted via the adjusting spindle. The axial movement of the sliding shaft is converted into a radial movement of the eccentric via the skew-slotted groove in the hollow shaft.

Metering pumps

Gas Compressors of SUNDSTRAND Corporation (Sundyne) (France)

Single-Stage centrifugal compressor, LMC/BMC-331 (341), LMC/BMC-333 (343), LMC/BMC-337.

  • Capacity up to 1450 - 6030 nm3/h
  • Operating pressure up to 70 - 100 bar
  • Rotor speed up to 33600 rpm
  • Motor power up to 298 - 335 kW
  • Operating temperature: -130 to +260°C
  • Vertical or horizontal
Sundyne gas compressors

Single-stage Sunflo blower

  • Capacity up to 340 nm3/h
  • Operating pressure up to 7 bar
  • Rotation speed up to 21000 rpm
  • Motor power up to 56 kW
  • Operating temperature: 0 to 149°C
  • Vertical

Multi-stage centrifugal compressor Pinnacle LF-2000 (API 617)

  • Capacity up to 17000 nm3/h
  • Operating pressure up to 350 bar
  • Rotor speed up to 42000 rpm
  • Motor power up to 2983 kW
  • Operating power: -130 to 260°C
  • Horizontal

check valve
globe valve
membrane valve